Learn more about our products of the product category L.SMR tune.
EXCEPTIONAL PREPARATION FOR EXCEPTIONAL EFFICIENCY.
Repeatable quality, consistent performance and total precision – these are the essential requirements for any fastening tool. The running-in of geared offset heads on our specifically designed test rig, satisfies precisely these requirements.
Before final acceptance, the geared offset head is subjected to 3,000 fastening cycles at the maximum permissible torque. The running-in certificate issued at the end of this test documents constant efficiency and serves as the basis for calibrating the entire tool.
This unique LÜBBERING Service thus enables even better interplay between the tool and the drive machine and delivers consistent quality throughout the entire product life cycle of the geared offset head.
- Constant efficiency
- Individual running-in certificate
- Traceability via serial number
PEOPLE SAY “YOU CAN’T BEAT OPTIMAL”. WELL, WE CAN.
Trimmed open geared offset heads enable absolute precision in torques on threaded pipe or hose unions in the smallest spaces. Because of their shape and the open output gearwheel, which is what makes this fastening technique possible in the first place, the precision values achievable with open geared offset heads are lower than those of their closed counterparts. In order to be able to perform precise, repeatable fastening operations in these cases. LÜBBERING offers trimming of the geared offset heads as well as running-in.
With this process, LÜBBERING is able to optimise open geared offset heads for your individual application, and trim the torque range which is needed to the highest possible degree of precision.
Optimising open geared offset heads by trimming is always combined with the running-in.
- Maximum precision for open geared offset heads
- Consistent fastening quality
- Individual quality certificate
MACHINE CAPABILITY ANALYSIS
MACHINE CAPABILITY ANALYSIS: A LONG PHRASE BUT A SHORT PROCESS and EXCELLENT RELIABILITY.
A comprehensive consideration of a fastening process must not only include a test of the individual components, but also an analysis of the interplay between them. We are able to analyse the machine capability of fastening systems in different variations.
In this statistical procedure, our experts analyse the tolerance consumption and tolerance situation of the fastening system. By the determination of the machine capability indicator (Cm, Cmk) you are able to decide whether the fastening system is suitable for your particular application.
- Test certificate with measurement results
- Free choice of drive technology
- Test torques from 2 – 1,000 Nm
- Consistent quality